If your garbage has suddenly started throwing tantrums and refuses to work as per your expectations, it is time to read this article for support. Issues with garbage units are quite common and your garbage under the sink may stop working sometimes. It happens with many however; you need to know the reasons why it happens and the frequency of the same. Some of the setbacks are mainly due to our own negligence.
In this article, we shall take a look at some of the common reasons why under sink machine is broken and the tips to solve these issues with ease.
Fix Garbage if the under-sink machine is broken
Before you begin with the easy troubleshooting guidelines, it would be wise to understand the issue your garbage unit is giving under the sink. Find out if your unit is clogged, leaking, failed to drain, failed to grind, jammed, or anything not listed here. The clearer you are with the problem, the sooner you will be able to diagnose and repair it.
- Have you ever noticed the reset button that helps you protect your garbage machine from being overloaded? Press that reset button and wait for a minute or two. Hopefully, this should solve any general or common issue you may have with your garbage unit.
- Another workaround is to check the cords and cables and confirm if everything is working fine. If needed, you may also reset the circuit breaker to ensure that it is supplying proper electricity to your garbage unit.
- Make use of a ΒΌ-inch hex wrench into the provided hex-shaped old which is usually under the garbage disposal. Try rotating a few times to put the impellers at ease. Before you perform this task, ensure that you have disconnected power. In case you do not have a hex wrench, you may also use a short broomstick in the unit.
If none of the above seems working, you may have to call for technical support from your manufacturer. A few other areas that you need to be sure of are whether your garbage unit is failing to drain the water. Under such scenarios, your garbage drain could be damaged. You may need to check more on the troubleshooting with garbage clogging issues with the drain.
Another area to check would be the leakage issues. Has your under-sink machine started leaking? Find out the root of the leakage; check the pipes if those are fitted properly or if there are any loose ends.
One more possibility of a damaged garbage machine could be when it makes no noise or suddenly stops functioning. There are possibilities that your garbage sink could be receiving less or improper power. You may again have to try pressing the reset button and check if it starts working this time properly. If your garbage disposal smells bad, deodorizing and running some warm water may help here. For any other troubleshooting issues, you will have to consult your manufacturer for the same.